Extractor radial 32F, programautomatic,barrel 95,370W

Capacity: 32 beehive frames with the height 14-26 cm and length of the upper bar of 48 cm
Drive: electric motor 370W / 230V with full electronic speed control
The internal diameter of the barrel: 95 cm

The 32 frames honey extractor is powered by an electric motor 370W / 230V with full electronic speed control. A safety lock is built-in, which stops the motor if the lid of the extractor is opened during the operation. Modern technology enables the innovative manufacturing of the bottom of the extractor. The bottom of the extractor is welded without any inner edges and is inclined towards the tap. Extractor has two welded stainless taps (6/4'' and 2''). Stainless tap 2'' is built in at the lowest point so all the honey can drain out of the extractor. All parts of a honey extractor which come in contact with honey are made of materials appropriate for managing foods. The lid is made of transparent acrylic glass.

During the extraction process, frames in the extractor do not need rotation since the centrifugal force and the natural tendency of the cells ensure that both sides of a frame are being emptied at the same time.

The extractor can be disassembled and carried through a door 80 cm wide.

Enables extracting honey from 32 beehive frames with the height 14-26 cm and length of the upper bar of 48 cm

Automation enables the entire process of extraction independent, and the user can focus on other tasks during that time. Managing is simple using a digital two-line LCD display and a foil keyboard. Eight different programs can be set and saved. In each program, eight different times, directions and rotation speeds can be programmed. Basic extraction programs are already preset and can be changed any time, or new programs can be additionally set and saved. The extractor is silent, reliable and has a compact design.

Guarantee: 2 years
Type: LTA 32SR

Accessories:
- The 12V DC-230V AC, 600W (Art. 4627) converter enables the operation of the extractor with a 12V DC battery if an electrical supply of 230V is not available.
- Bottom heating for extractor o 95-110 cm incl. assembly – our recommendation for a quicker extraction and filtering of honey and easier cleaning of the extractor, art. nr. 7126
- A radial basket can be easily transformed into a tangential basket by inserting four additional nets (Art. 7761) which enables extracting four large beehive frames up to 30 cm high. In this case, a bag for spinning honeycombs (Art. 7758) can be hung in the basket with the nets, and honey can be easily drained from the uncapped wax cells.
- By mounting rubber pads (Art. 7769) on the legs, the extractor will not slide so easily.