Vacuum filter lid for fine honey filtration, Ø 31 cm

Vacuum honey filtration significantly increases filtration capacity.

The filtering lid is designed for fine vacuum filtration of honey. It consists of a lid compatible with our LOGAR honey storage containers with an internal diameter of 30.5 cm, a removable fine filter, and a hose connection for connecting to a vacuum pump.
For vacuum filtration, it is important that the filter is hermetically sealed to the container. If you use LOGAR containers and your container does not have a clamping ring, it must be purchased separately.

With the help of a vacuum pump (not included in the delivery), negative pressure is created inside the container, which allows the honey to be drawn through the filter, significantly increasing the filtration capacity.
Place the filtering container at a height corresponding to the height of your storage container into which the finely filtered honey flows.
If you wish to fill the finely filtered honey directly into jars, a drip-free honey filling valve (art. 7450) can be installed on the outlet valve to make filling easier.

We recommend that the honey used for vacuum filtration is liquid and roughly pre-filtered. A coarse filter is also available to retain larger particles.
The vacuum lid also allows replacement of the fine filter (mesh opening 0.71 mm) with a very fine filter (mesh opening 0.315 mm), which retains small crystals and very fine particles.
If crystals are retained in the filter, the honey will crystallize much later and will not need to be reheated and decrystallized multiple times. For very fine filtration, it should be noted that the honey must have lower viscosity or be slightly warmed.

Optional accessories
7081 Vacuum pump 217 l/min, single-stage
7020 Honey filter – coarse RSF O 24 cm, single
7075 Vacuum filter very fine O 24 × 13 cm, mesh opening 0.315 mm
7450 Drip-free honey filling valve, stainless steel
2471 Container stand O 31 cm, dismountable, stainless steel
7154 Filter cloth for Melitherm 40 × 40 cm
2415 Clamping ring for hermetic containers O 31 cm, stainless steel
708101 Spiral hose (inner O 25 mm)