Extractor radial 12F, motor 110W,barrel 76,with grids

Capacity: 12 beehive frames with the height up to 26 cm
Drive: electric motor 110W / 230V
The internal diameter of the barrel: 76 cm

The 12 frames honey extractor is powered by an electric motor 110W / 230V with a safety switch which stops the motor if the lid of the extractor is opened. Modern technology enables the innovative manufacturing of the bottom of the extractor. The bottom of the extractor is welded without any inner edges and is inclined towards the tap. With a handle, the rotation speed from 0 to 280 rpm can be optionally chosen to the left or right. A welded stainless tap is built in at the lowest point so all the honey can drain out of the extractor. All parts of a honey extractor which come in contact with honey are made of materials appropriate for managing foods. The lid is made of transparent acrylic glass.

During the extraction process, frames in the extractor do not need rotation since the centrifugal force and the natural tendency of the cells ensure that both sides of a frame are being emptied at the same time. The basket is constructed so that a frame leans against the wire net during rotation. Thus, this prevents the breakage of the honeycombs.

Enables extracting honey from beehive frame with the height up to 26 cm and the length of the upper bar of 48 cm.

Guarantee: 1 year
Type: LTM 10SRM

Accessories:
- Bottom heating for extractor o 76 cm incl. assembly – our recommendation for a quicker extraction and filtering of honey and easier cleaning of the extractor, art. nr. 7125
- The 12V DC-230V AC, 300W (Art. 4626) converter enables the operation of the extractor with a 12V DC battery if an electrical supply of 230V is not available.
- By mounting rubber pads (Art. 7769) on the legs, the extractor will not slide so easily.