RADIAL EXTRACTORS
LOGAR® radial honey extractors are suitable for both hobby and professional beekeepers. They are of high quality, produced on site, and made of materials suitable for contact with honey. They are normally used for extracting low to medium viscosity honey.
WORKING PRINCIPLE:
Radial extractors are equipped with special baskets where the honeycombs are stacked vertically around the axle, like the spikes on a wheel. Due to the centrifugal force and the natural inclination of the cells, both sides of the honeycombs are emptied at the same time, so that they do not have to be turned on the other side during extraction.
We offer self-turning honey extractors with different drives:
- manual: one-way hand drive with a bracket allows the basket to rotate to the right, while turning the handle in the opposite direction simply stops the basket rotation. It is possible to later upgrade these extractors to a motor drive when needed.
- motor-driven: the user can adjust the direction and speed of rotation during extracting.
- A reliable electric motor with a variable speed control lever allows you to set the speed from 0 - 280 rpm, left or right. The motor-driven extractors have a built-in safety switch that stops the motor if the front lid of the extractor is opened.
- fully automatic: the spin cycle is fully automatic by selecting the appropriate programme. We recommend this option as it allows the beekeeper to concentrate on other tasks during the extracting process, thus saving time.
The honey extractors with a motor drive and with the fully automatic control have a built-in safety device that stops the operations.
Features:
- welded stainless tap is built in at the lowest point so that all honey can drain out of the extractor,
- transparent acrylic glass lids allow you to observe the process of extraction.- different types of radial extractors available: with different baskets to suit different numbers and sizes of honeycomb frames. The beekeeper should choose an extractor, that is adapted to the size of the frames he uses to achieve an optimal extraction process.
The bottom heating for the honey extractor is available as additional equipment and enables:
- easier extraction of honey, especially when extracting for several days,
- easier cleaning,
- faster draining of honey from the barrel and better filtering of honey.
Made in EU (Slovenia).
Service and spare parts supply guaranteed.
With the help of our FILTER, you can find a suitable extractor even more easily.
RADIAL EXTRACTORS
LOGAR® radial honey extractors are suitable for both hobby and professional beekeepers. They are of high quality, produced on site, and made of materials suitable for contact with honey. They are normally used for extracting low to medium viscosity honey.
WORKING PRINCIPLE:
Radial extractors are equipped with special baskets where the honeycombs are stacked vertically around the axle, like the spikes on a wheel. Due to the centrifugal force and the natural inclination of the cells, both sides of the honeycombs are emptied at the same time, so that they do not have to be turned on the other side during extraction.
We offer self-turning honey extractors with different drives:
- manual: one-way hand drive with a bracket allows the basket to rotate to the right, while turning the handle in the opposite direction simply stops the basket rotation. It is possible to later upgrade these extractors to a motor drive when needed.
- motor-driven: the user can adjust the direction and speed of rotation during extracting.
- A reliable electric motor with a variable speed control lever allows you to set the speed from 0 - 280 rpm, left or right. The motor-driven extractors have a built-in safety switch that stops the motor if the front lid of the extractor is opened.
- fully automatic: the spin cycle is fully automatic by selecting the appropriate programme. We recommend this option as it allows the beekeeper to concentrate on other tasks during the extracting process, thus saving time.
The honey extractors with a motor drive and with the fully automatic control have a built-in safety device that stops the operations.
Features:
- welded stainless tap is built in at the lowest point so that all honey can drain out of the extractor,
- transparent acrylic glass lids allow you to observe the process of extraction.
- different types of radial extractors available: with different baskets to suit different numbers and sizes of honeycomb frames. The beekeeper should choose an extractor, that is adapted to the size of the frames he uses to achieve an optimal extraction process.
The bottom heating for the honey extractor is available as additional equipment and enables:
- easier extraction of honey, especially when extracting for several days,
- easier cleaning,
- faster draining of honey from the barrel and better filtering of honey.
Made in EU (Slovenia).
Service and spare parts supply guaranteed.
With the help of our FILTER, you can find a suitable extractor even more easily.
Checkout our offer of catalogs for more detailed information about our products. You can download them in PDF format.
Read catalogTuesday, Wednesday and Friday
9.00 - 12.00 and 13.00 - 15.00
Monday and Thursday
9.00 - 12.00 and 13.00 - 16.00
Saturday
closed
Store location
New in our offer, sales, newsletters, advice and more. Join our newsletter and stay in touch with us!
Join our newsletter